网站公告列表     无忧教育最新改版成功!  [51education  2008年5月21日]        
加入收藏
设为首页
联系站长

您现在的位置: 无忧英语教育网 >> 英语学习中心 >> 其它英语 >> 分类词汇大全 >> 交通运输词汇 >> 正文
 
汽车机械英语词汇翻译(11)          【字体:
 

汽车机械英语词汇翻译(11)

作者:佚名    文章来源:不详    点击数:    更新时间:2006-8-6     


maximum autohrozed total mass 最大设计装载质量
maximum design pay mass 最大允许装载质量
maximum autohorized pay mass 厂定最大总质量
manufacturer's maxumum total mass 载重量
payload 车辆自重
kerb weight 总重量
gross weight 轴荷
axle load 最大设计轴荷
maximum design axle load 最小设计轴荷
minimum authorized axle load 最大允许轴荷
maximum design axle load 轮胎最大设计拖挂质量
maximum design tyre load 最大设计拖挂质量
maximum authorized tyre load 最大允许拖挂质量
maximum authorized towed mass 汽车列车最大设计质量
maximum design mass of vehicle combination 汽车列车最大允许质量
maximum authorized mass of vehicle combination 铰接车最大设计质量
maximum disgn mass of articulated vehicle 铰接车最大允许质量
maximum authorized amss of articulated vehicle 半挂牵引车承受的最大静载荷
maximum design static laod borne by semi-trailer towing vehicle 作用在挂接装置上的最大设计静载荷
maximum design static laod on coupling device 作用在挂接装置上的最大允许静载荷
maximum authorized static load on coupling device 比功率
power/mass ratio 比扭矩
torque/maximum total mass ratio 重量利用系数
factor of weight utilizaton 汽车型谱
chart of automotive model 后驱动汽车
rear drive automobile 前驱动汽车
front drive automobile 发动机后置式客车
bus with rear engine 四轮驱动车辆
all wheel drive automobile 发动机前置式客车
bus with front engine 发动机底置式客车
bus with underfloor engine 计算机辅助设计
computer aided deisgn(CAD) 有限寿命设计
design for finite life 累积疲劳损伤原理
theory of cumulative damage in fatique 优化设计
optimum deisgn 汽车尺寸控制图
sketch on layout ofr dimenshion's control of assembly 汽车总装配图
automobile assembly drawing 汽车总布置草图
sketch for automobile layout 汽车设计的技术经济分析
technical -economic analysis in automobile design 设计任务书
design assignment 系列化、通用化、标准化
seriation ,universalization and standardization 总布置设计
calculation for layout 运动校核
correction of motion 侧视轮廓
side outline 前视轮廓
end outline 顶视轮廓
plan outline 车长
vehicle length 车宽
vehicle width 车高
vehicle height 轴距
wheel base 轮距
track 前轮距
track front 后轮距
track rear 双胎间距
space between twin wheels 前悬
front overhang 后悬
rear overhang 离地间隙
ground clearance 纵向通过角
ramp angle 接近角
approach angle 离出角
departure angle 车架高度
height of chassis above ground 驾驶室后车架最大可用长度
maximum usable length of chassis behind cab 车身长度
body work length 车厢内部最大尺寸
maximum internal dimension of body 货厢内长
loading space length 货厢有效长度
loading length 货厢内宽
loading space width 货厢有效内宽
loading width 货厢内高
loading space height 货厢有效内高
loading height 货台高度
loading surface height 车架自由长度
frame free length 栏板内高
inside board hegiht 货厢容积
loading surface 门高
door height 门宽
door width 车架有效长度
chassis frame useful length 货厢全长
body length 牵引杆长
drawbar length 牵引装置的位置
position of towing attachment 牵引装置的悬伸
overhang of towing atachment 牵引装置的高度
heigth of towing attachment 牵引装置牵距
distance of towing attachment 牵引座前置距
fifth wheel lead 长度计算用牵引座前置距
fifth wheel lead for calculation of length 质量分配用牵引座前置距
fith wheel lead for calculation of mass distribution 牵引座结合面高度
height of coupling face 牵引装置至车辆前端的距离
distance between towing device and front end of towing vehicle 牵引叉销至车辆前端的距离
distance between jaw and front end of towing vehicle 半挂车间隙半径
rear tractor clearance radius of semi-trailer 半挂车前回转半径
front fitting radius of semi trailer 车轮垂直行程
vertical clearance of wheel 车轮提升高度
lift of wheel 转弯半径
turning circle 静止半径
static radius 碰撞
collision (crash,impact) 正碰撞
frontal collision (frontal impact) 侧碰撞
side collision (side impact) 后碰撞
rear collision (rear impact) 擦碰撞
sidewipe collision 碰撞方向
collision direction 碰撞角度
collision angle 倾斜的
oblique(tilt) 成角度的
angled 纵向的
longitudinal 垂直的实践证明经常访问无忧英语教育网 www.51education.net ,能迅速提高你的英语学习能力!积沙成塔,不断提高! 本站所提供的所有信息仅供学校课堂教学及英语学习者学习研究之用,其著作权归原作者及媒体所有。

文章录入:soosun    责任编辑:soosun 

  • 上一篇文章:

  • 下一篇文章:
  • 发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口
    最新热点 最新推荐 相关文章
    节日必备:如何用英语买到称…
    On her own, but not alone
    “发疯”的两种新潮英语说法
    国外生活必备英文词汇-住宿…
    几个流行词
    第30课:与选举有关的词汇
    雅思范文:谈谈你身边城市交…
    禽流感常用英语词汇及生化术…
    雅思词汇与句型总结
    雅思阅读词汇:自然与科技-…
      网友评论:(只显示最新10条。评论内容只代表网友观点,与本站立场无关!)
     www.51education.net 无忧英语教育网 提供英语学习动力 版权所有 2006-2011 站长:无忧
    浙ICP备05019856号