网站公告列表     无忧教育最新改版成功!  [51education  2008年5月21日]        
加入收藏
设为首页
联系站长

您现在的位置: 无忧英语教育网 >> 英语学习中心 >> 其它英语 >> 分类词汇大全 >> 交通运输词汇 >> 正文
 
游艇专业英语词汇(M1)          【字体:
 

游艇专业英语词汇(M1)

作者:佚名    文章来源:不详    点击数:    更新时间:2006-8-6     


 操纵[用]空气 maneuvering air
 雷锚 mine anchor
 系泊锚,碇泊锚 mooring anchor
 蕈形锚 mushroom anchor
 机舱布置 machinery arrangement
 系泊布置 mooring arrangement
 船模试验槽 model basin
 主轴承 main bearing
 系缆柱 mooring bitt
 可动叶片 moving blade (or vane)
 组成滑车 made block
 木滑车,棒眼滑车 mortice block
 客货船 mixed boat
 机动艇,汽艇,马达艇 motor boat
 主锅炉 main boiler
 船用锅炉 marine boiler
 水银锅炉 mercury boiler
 多管锅炉 multitubular boiler
 磁力煞 magnetic brake
 最大宽度 maximum breadth
 型宽,模宽 moulded breadth
 锰青铜 manganess bronze
 主舱壁 main bulkhead
 多线电缆 multi-conductor cable
 多芯电缆 multi-core cable
 丈量容量 measurement capacity
 中碳钢 medium carbon steel
 呎码货 measurement cargo
 展性铸铁 malleafle cast iron
 制造证书 maker's certificate
 传动链 messenger chain
 药箱 medicine chest
 机械底座垫 machinery chock
 蒙钠护面钢 monel clad steel
 多板离合器 multi-plate clutch
 船用煤 marine coal
 主旋塞 master cock
 舯剖面系数 midship section coefficient
 桅座圈 mast hole collar
 磁罗经 magnetic compass
 主罗经 master compass
 主机冷凝器 main condenser
 标柱间航线(试航) measured mile course
 电磁起重机,磁力起重机 magnet crane
 铣刀 milling cutter
 混合循环 mixed cycle
 主甲板 main deck
 模深,型深 moulded (or molded) depth
 定倾中心曲线图 metacentric diagram
 平均直径 mean diameter
 模排水量,型排水量 moulded displacement
 麦克英太[bottom二]重底 Macintyre double
 平均吃水 mean draught
 模吃水 moulded (or molded) draught
 多轴钻床 multiple drill
 弹性系数,弹性模数 modulus of elasticity
 主机排气 main exhaust
 轮机 marine engine
 多胀式机 multiple expansion engine
 主机 main engine
 马达风扇 motor fan
 主给水止回阀 main feed check valve
 多岐排气 multiple exhaust
 多盘管给水加热器 multi-coil feed heater
 磁场 magnetic field
 模型试验,船模试验 model experiment
 补充给水阀 make up feed valve
 磁通,磁流 magnetic flux
 电动发电机 motor generator
 金属软管 metallic hose
 主肋骨 main frame
 舯[部]肋骨 midship frame
 操纵装置 maneuvering gear
 力矩 moment of force
 短艏艛 monkey forecastle
 系船大索 mooring hawser
 大木锤 maul hammer
 多流加热器 multi-flow heater
 机械组件 machine elements
 机制裕度 machine finish allowance
 机械,机器 machinery
 轮机室,机舱 machinery room (or space)
 马赫数 Mach number
 鲭钓渔船 mackerel pole and line fishing boat
 磁罗经导航 magnetic compass pilot
 磁倾角 magnetic dip
 桃花心木 mahogany
 舯部最大宽度 main breadth line
 主电源 main electric power source
 桅根 mast heel
 最大载重,最大负荷 maximum load
 机械,机器 machine
 机械氧割 machine oxygen cutting
 机械底座垫 machinery chock
 磁罗经 magnetic compass
 磁场 magnetic field
 磁性检验法 magnetic inspection
 磁力过滤器 magnetic strainer
 主帆脚索 main sheet
 主蒸汽管 main steam pipe
 木槌 mallet
 操纵用蓄气器 maneuvering reservoir
 操船模拟机 manoeuvering simulator
 操船信号灯 manoeuvre light
 人工排料 manual nest
 双桅船 Marconi rigged ketch
 边缘,余裕 margin
 边缘板 margin plate
 后桅 mizzen mast
 桅具 mast fitting
 桅跟座 mast step
 桅平台 mast table
 物料控制 material control
 物料检查 material inspection
 大[木]槌 maul hammer
 额定最大连续出力 maximum continuous rating (MCR)
 最大风速 maximum wind speed
 平均塑变深度 mean depth of deformation
 水银灯,汞灯 mercury lamp
 弹药舱 magazine
 磁偏转 magnetic deflection
 磁应变 magnetic strain
 主给水止回阀 main feed check valve
 主船壳 main hull
 补给阀 make up valve
 海洋资源 marine resources
 船用涡轮机 marine turbine
 桅环 mast collar
 桅跟 mast heel
 毡合时限 mat life
 最大瞬间风速 maximum instantaneous wind speed
 平均叶宽比(螺桨) mean width ratio
 丈量吨位 measurement tonnage
 机械吊杆 mechanical davit
 金属浴槽 metal bath
 金属焊条,金属电极 metal electrode
 舯舱 midship tank
 铣床 milling machine
 布雷艇 mine layer
 矿碴棉 mineral wool
 最小探测距离 mini detectable range
 最小干舷 minimum freeboard
 斜方轮 miter wheel
 混合蒸汽 mixed steam
 模,铸模 mold (or mould)
 模深,型深 molded depth (D)
 机油 machine oil
 轮机装 machinery fitting
 磁通检验 magnaflux inspection
 自差 magnetic deviation
 主舱壁 main bulkhead
 主肋骨 main frame
 主开关 main switch
 操纵轴 maneuvering shaft
 锰钢 manganese steel
 马尼拉绳 Manila rope
 手动警报系统,人工警报系统 manual alarm system
 麻时效钢 maraging steel
 船台[滑道] marine railway
 质量矩阵 mass matrix
 桅 mast
 机械铸造 machine casting
 电磁起重机 magnetic crane
 放大因子 magnification factor
 处女航 maiden voyage
 主轴承 main bearing
 主机冷凝器 main condenser
 主无线电信设备 main radiotelegraph installation
 磁针 magnetic needle
 磁电机 magneto (or magneto machine)
 主甲板 main deck
 操纵 maneuvering (or manoeuvering)
 人孔盖 manhole cover
 歧管 manifold
 自动操作机 manipulator
 操纵性指标 manoeuverability index
 纵帆快艇 Marconi rigged yawl
 边际线 margin line
 船用柴油,柴油 marine diesel oil
 船用胶 marine glue
 桅色漆(土黄色) mast color paint
 桅头,桅顶 mast head
 最适生产率 maximum efficient rate (MER)
 最大工作压力 maximum working pressure
 平均叶宽比 mean blade width ratio
 平均活塞速度 mean piston speed
 热功当量 mechanical equivalent of heat
 机械功 mechanical work
 船舶法 merchant ship act
 水银涡轮机 mercury turbine
 分厘卡,测微计 micrometer
 舯体 middle body
 无机[物]绝缘电缆 mineral insulated cable
 最小潜变率 minimum creep rate
 负余面 minus lap
 移动电台 mobile station
 模型试验 model test
 水分,湿度 moisture
 缘饰,造模翻砂,塑模 molding (or moulding)
 穆尔斯信号灯 Morse signal lamp
 机匠锤 machinist hammer
 磁吹 magnetic blow
 展性 malleability
 操纵用空气压缩机 maneuvering air compressor
 人孔加强环板 manhole ring
 扶手索 manrope
 多帆单桅小船 Marconi rigged sloop
 船用煤 marine coal
 船用检流计 marine galvanometer
 索针 marline spike
 主罗经 master compass
 桅楔 mast wedge
 运肉船 meat carrier
 百万欧[姆] megohm
 经向应力 meridional stress
 海生物防附装置 MGPS (= marine growth preventing system)
 人造云母 micanite
 舯剖面图 midship section plan
 金属惰气电弧焊 MIG (= metal electrode inert gas-shielded arc) welding
 管理信息系统 MIS (= management infor- mation systems)
 混合物 mixture
 模型实船相关裕度 model ship correlation allowance
 系船孔 mooring hole (or port)
 系泊索 mooring line
 系船具 moorings
 机动游艇 motor yacht
 多芯电缆 multi-conductor cable (or multi-core cable)
 多点建造法 multi-starting point building system
 多点平行切断机 multi-torch flame planer
 磁针 magnetic needle
 主卷扬索 main hauling line
 机械配件 machine parts
 磁检铁粉 magnaflux powder
 电磁起重机,磁力起重机 magnet crane
 梅尔型艏 Maier form bow
 主给水阀 main feed valve
 主舵 main rudder
 主帆 main sail
 操纵能力 maneuvering ability
 液体压力计 manometer
 手动控制站,人工控制站 manual control station
 人工操纵 manual handling
 海事安全委员会 mariner safety committee (MSC)
 船长,主柱 master
 桅座圈 mast hole collar
 桅肩 mast hound
 桅倾度 mast rake
 桅跟座 mast stop
 阴阳模,偶模 matched molds
 最大燃烧压力 maximum combustion pressure
 最初故障平均时间 mean time to first failure (MTFF)
 机械推进救生艇 mechanically propelled lifeboat
 餐厅 mess room
 惰性气体遮蔽电弧焊 metal inert gas shielded arc welding
 金属箔 metallic paper
 微观组织试验 micrograph test
 中心线内底板 middle line strake
 轧钢鳞片 mill scale
 每秒百万指令 MIPS (= million instruc- tions per second)
 型图(放样) mold plan
 木齿轮 mortice wheel
 动力救生艇,马达救生艇 motor lifeboat
 多断开关 multi-break switch
 多杆材料试验机 multiple lever testing machine
 机油 machine oil
 马达艇 motor launch
 桅灯 masthead light
 机具 machine tool
 机械老虎钳 machine vice
 磁力滤油器 magnetic oil strainer
 磁力探勘 magnetic prospecting
 主压载舱 main ballast tank
 主锅炉 main boiler
 主帆升降索 main sail halyard
 主配电盘 main switchboard
 维护,保养 maintenance
 厂商证书 maker's certificate
 展性铸铁 malleable cast iron
 操纵装置 maneuvering gear
 航行家型轮,海员,航海家 mariner
 主罗经 mass compass
 主控制系统 master control unit
 桅孔 mast opening
 桅箍 mast ring
 最大叶宽比 maximum blade width ratio
 连续最大出力 maximum continuous output (MCO)
 逃生方法 mean of escape
 平均水线面 mean water plane
 机械式调速机 mechanical governor
 机械式轴封 mechanical seal
 机械试验 mechanical test
 最适生产率 MER (= maximum efficient rate)
 水银动力装置 mercury plant
 混合气体遮蔽电弧焊 metal active gas shielded arc welding
 金属网铠装 metal braid armour
 金相学 metallurgy
 舯 midship
 布雷潜水艇 mine layer submarine
 扫雷艇 mine sweeper
 扫雷勤务舰 minesweeper tender
 小灯泡 miniature bulb
 混载货物 mixed cargo
 混合喷嘴 mixing nozzle
 取模 mocking up
 动量 momentum
 系船大索 mooring hawser
 马达控制器 motor controller
 马达起动器 motor starter
 模宽,型宽 mould breadth
 模吃水 moulded (or molded) draught
 送话口,泵吸口,封口件 mouth piece
 泥浆泵 mud pump
 多盘阀 multi disc valve
 多管式龙骨 multi-pipe keel
 多段泵 multi-stage pump
 金属接合 metallic joint
 机舱布置 machinery arrangement
 机械工厂 machine works
 磁爪(单面电焊) magnetic jog
 磁控[电子]管 magnetron
 操纵性[能] maneuverability
 操纵步骤 maneuvering sequence
 人孔盖 manhole door (or cover)
 岐管阀 manifold valve
 手动切割 manual cutting
 单桅船 Marconi rigged cat
 船用引擎 marine engine
 海生物防附装置 marine growth preventing system (MGPS)
 落样,记号,划线 marking
 墩楔 marrying wedge
 质量,大量 mass
 坞中接合方法 master butt method in dock
 桅梯 mast ladder
 材料 material
 最大叶宽 maximum blade width
 最高速[率] maximum speed
 平均螺距,平均节距 mean pitch
 中[负]荷[使]用 medium duty
 水银灯 mercury lamp
 金属弧焊接 metal arc welding
 金属软管 metallic hose
 舯剖面系数 midship section coef- ficient
 软钢 mild steel (MS)
 最小可测范围 minimum detectable range
 最低转速试验 minimum revolution test
 单元(电算),系数,模数,模块 module
 纵弹性模数 modulus of longitudinal elasticity
 顶桅轻帆 moonsail (or moonraker)
 系船绞车 mooring winch
 镶嵌细工,马塞克作业 mosaic work
 原动力 motive power
 内燃机船 motor vessel (or ship) (MV, or MS)
 内燃机油轮 motor tanker (MT)
 成形绝热材 moulded heat insulating material
 可动叶片 moving blade (or vane)
 平均潮位 MTL (= mean tide level)
 多轴环式 multi collar type
 多流加热器 multi-flow heater
 多人用焊接机 multiple operator welding machine
 多点系泊 multi-point mooring
 多用途货船 multi-purpose cargo ship (MPC)
 机械设计 machine design
 肉眼检查,巨观检查 macroscopic test
 磁力煞 magnetic brake
 磁极 magnetic pole
 主桅 main mast
 主构件 main piece
 主轴 main shaft
 断续电花点火 make and break (or hammer ) spark ignition
 补给给水阀 make up feed valve
 心轴 mandrel
 人工焊接 manual welding
 海洋污染 marine pollution
 物料集配 material handling (or distribution)
 平均潮位 mean sea level (MSL)
 平均迹流 mean wake
 度量衡,测定,测量 measure
 标柱速率测定 measured mile trial
 量测仪器 measuring instrument
 机械通风 mechanical ventilation
 扩音器,喇叭筒 megaphone (or speak trumpet)
 内存(电算) memory
 定倾中心 metacenter
 公尺,计,表 meter (or metre)
 微观试验 microscopic test
 辊轧号数 mill number
 矿,水雷 mine
 杂项工作 miscellaneous work
 飞弹舱 missile magazine
 糖蜜船 molasses tanker
 熔态金属 molten metal
 抗艉骤降力矩(下水) moment against tipping
 蒙纳护面钢 Monel clad steel
 系船转环 mooring swivel
 素面小瓷砖,马赛克小瓷砖 mosaic tiling
 马达,电动机,发动机 motor
 蕈形通风筒 mushroom ventilator
 桅顶灯 mast head lamp
 系泊索 mooring line
 榫眼机 mortising machine
 机钻 machine drilling
 甲种机舱空间 machinery space of category A
 机械重量,轮机重量 machinery weight
 磁阻尼器 magnetic damper
 磁变 magnetic variation
 磁楔(单面电焊) magnetic wedge
 主桅支索 main rigging
 轴[驱动]发电系统 main shaft driven generating system
 操纵阀 maneuvering valve
 锰青铜 manganese bronze
 手动控制,人工控制 manual control
 手操作,人工操作 manual operation
 边缘板(木甲板) margin (or boundary) plank
 余裕厚度 margin thickness
 缠索 marline
 桅顶灯 mast head light (or lamp)
 桅座 mast housing
 最大剖面系数 maximum sectional coefficient
 平均压力 mean pressure
 标柱间航线(试航) measured mile course
 机械喷射 mechanical injection
 机械负荷 mechanical load
 机械操作阀 mechanical operating valve
 机工,机械士 mechanician
 补助索 messenger line
 金属 metal
 显微试验 microscopic examination
 密尔(千分之一吋) mil
 集用阀,集合阀 miter group valve
 混合室 mixing chamber
 船模试验槽 model basin (or tank)
 和风(四级风) moderate breeze
 模线,型线 molded line
 造模机,塑造机 molding machine实践证明经常访问无忧英语教育网 www.51education.net ,能迅速提高你的英语学习能力!积沙成塔,不断提高! 本站所提供的所有信息仅供学校课堂教学及英语学习者学习研究之用,其著作权归原作者及媒体所有。

文章录入:soosun    责任编辑:soosun 

  • 上一篇文章:

  • 下一篇文章:
  • 发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口
    最新热点 最新推荐 相关文章
    节日必备:如何用英语买到称…
    On her own, but not alone
    “发疯”的两种新潮英语说法
    国外生活必备英文词汇-住宿…
    几个流行词
    第30课:与选举有关的词汇
    雅思范文:谈谈你身边城市交…
    禽流感常用英语词汇及生化术…
    雅思词汇与句型总结
    雅思阅读词汇:自然与科技-…
      网友评论:(只显示最新10条。评论内容只代表网友观点,与本站立场无关!)
     www.51education.net 无忧英语教育网 提供英语学习动力 版权所有 2006-2011 站长:无忧
    浙ICP备05019856号